Sessions

Power Converters I:

  • PC1.1 “Buck-inverter converter for application in inductive wireless transmission”. Marco Carbajal, Leobardo Hernández, Jesús Camacho and Alejandro Tapia.
  • PC1.2 “Quadratic Buck-Boost converter with voltage-ripple and current-ripple cancelation”. Julio C. Rosas-Caro, Jesus Valdez-Resendiz, Jonathan Mayo-Maldonado, Avelina Alejo-Reyes and Antonio Valderrabano-Gonzalez.
  • PC1.3 “Multi-Stage quadratic step-up converter”. Jesus Elias Valdez-Resendiz, Julio Cesar Rosas-Caro, Jonathan Carlos Mayo-Madonado, Armando Rafael Llamas-Terres, Javier Loranca-Coutiño and Carlos Alberto Villarreal-Hernandez
  • PC1.4 “Calculation of optimal switching angles for a multilevel inverter using NR and GA-a comparison”. Manuel Marin Reyes, Jesus Aguayo Alquicira, Susana Estefany De León-Aldaco, Eider Miguel Amores Camposand Yesenia Reyes Severiano

Power Converters II:

  • PC2.1 “Analysis and validation of an LC input filter quadratic buck converter”. Edgar Daniel Silva Vera, Jose M. Sosa, Gerardo Vazquez Guzman, Martinez P. Raymundo, Cesar A. Limones Pozos and Mario Juarez.
  • PC2.2 “Implementation and control of an industrial static VAr compensator”. Roberto Garcia Rochin, Jonathan Carlos Mayo Maldonado and Jesus Elias Valdez Resendiz.
  • PC2.3 “Fault detection methodology for the IGBT based on measurement of collector transient current”. Marco Antonio Rodriguez-Blanco, María Del Carmen Cervera-Ceballos and José Luis Vázquez Avila.
  • PC2.4 “Analysis of principle of operation of SiC transistors in a matrix converter leg”. Luis Javier Villagrán Valencia, Jazmín Ramírez Hernández, Nancy Mondragón Escamilla and Ismael Araujo Vargas.

Lighting Applications:

  • LA1.1 “Resonant half-bridge current-inverter (RHBCI) used as Power Supply for induction lamps with high-power-factor and without electrolytic capacitors”.Óscar Miguel Rodríguez-Benítez, Mario Ponce-Silva, Juan Antonio Aqui-Tapia and Claudia Cortés-García.
  • LA1.2 “Led driver for street light applications based on single stage high power factor”. Antonio J. Calleja Rodriguez, Pablo Quintana Barcia, Javier Ribas, Emilio Lopez Corominas, Jesus Cardesin Miranda and Manuel Rico Secades.
  • LA1.3 “Double buck-boost converter and its soft switching circuit used in lighting applications”. Pablo Guzman, Nimrod Vazquez, Claudia Hernandez, Rene Osorio and Hector Huerta

Simulation, modeling and analysis:

  • SMA1.1 “Modeling and control of a novel buck-inverter with application in inductive wireless power transmission”. Jesús Camacho, Leobardo Hernández, Juan Marquez and Marco Carbajal.
  • SMA1.2 “Reliability analisys of a flyback converter for automotive applications”. Mario Juarez, Ignacio Villanueva, Jose M. Sosa, Gerardo Vazquez Guzman, Adolfo R. López and Ruben Santillana.
  • SMA1.3 “Voltage and current switching-ripple cancelation in the double dual boost converter”. Jesus Elias Valdez-Resendiz, Julio C. Rosas-Caro, Jonathan Mayo-Maldonado, Gabriel Calderon-Zavala and Antonio Valderrabano-Gonzalez.
  • SMA1.4 “Design optimization of permanent magnet synchronous motors using multilevel Ant Algorithm”. Amir Ebrahimi.

Power Electronics and Energy Conversion:

  • PEEC1.1 “Development of a novel AC hybrid concept for a fuel cell-battery hybrid electric aircraft with power electronics switches”. Debjani Ghosh, Caroline Willich and Josef Kallo.
  • PEEC1.2 “Hybrid energy storage systems for electric vehicle applications: Multi-Source inverter topologies”. Omid Salari, Keyvan Hashtrudi Zaad, Praveen Jain and Alireza Bakhshai
  • PEEC1.3 “Active battery cell equalization using a Flyback converter with current mode control”. Manuel Rico-Secades, Pablo Quintana Barcia, Emilio López Corominas, Antonio Javier Calleja Rodríguez and Javier Ribas Bueno.
  • PEEC1.4 “Feeding type and forming type unit behavior in power electronics interface for interconnected or isolated microgeneration”. Alejandro Pérez, Jesús Mina, Víctor-Hugo Olivares-Peregrino, Jaime Arau and Hugo Calleja.
  • PEEC1.5 “Analysis of kinetic energy recovery system based on inertial flywheel”. Ivan Alfonso Reyes Portillo, Abraham Claudio Sanchez, Eligio Flores Rodriguez and Jesus Dario Mina Antonio.

Power Electronics applied to Renewable Energy I:

  • PERN1.1 “Control and energy management system techniques in renewable sources: A brief review”. David López-Flores and José Durán-Gómez.
  • PERN1.2 “DC-AC-AC converter for PV plant in medium voltage grid-connected systems”. Manuel Antonio Barrios, Victor Cardenas, José Manuel Sandoval, Mario Gonzalez and Homero Miranda.
  • PERN1.3 “Power electronics at grid edge – enables powering through disaster”. Jorge Ramos-Ruiz and Prasad Enjeti.

Power Electronics applied to Renewable Energy II:

  • PERN2.1 “Leakage current reduction for three-phase transformerless photovoltaic inverter”. Elizabeth Espitia, Hector Lopez, Nimrod Vazquez and Claudia Hernandez.
  • PERN2.2 “Current harmonics mitigation in a wind energy conversion system through the selection of the PI control parameters in the rotor side converter”. Adolfo R. Lopez-Nunez, Gerardo Vazquez, Jose M. Sosa, Mario A. Juarez and Carlos Correa-Betanzo.
  • PERN2.3 “Sizing methodology of fuel cell electric vehicle power plant”. Manuel De Jesus Lopez Perez, Abraham Claudio Sanchez, Felix Loyola Morales and Ulises Cano Castillo

Control Theory:

  • CT1.1 “A comparative analysis of space-vector PWM techniques for transformerless three-phase voltage source inverters”. Gerardo Vazquez Guzman, Jose Miguel Sosa Zuñiga, Cesar Augusto Limones Pozos, Jaime Arau Roffiel and Isaias Hernandez Avila.
  • CT1.2 “An equivalence between the ADRC and the Flat filtering controllers: A case study in double buck converter”. Eric William Zurita-Bustamante, Hebertt Sira-Ramirez and Jesús Linares-Flores.
  • CT1.3“Lyapunov-Based control strategy for a multi-function single-phase inverter for photovoltaic systems”. Daniel Palomares, Claudia Hernandez, Joaquin Vaquero and Nimrod Vazquez.